FIYAP100

Electronic ,for overhead lines, With LED display

¯       FIYAP100 is an electronic circuit fault indicator for overhead lines with  indication  by blinking  super high bright diodes (LED).

¯      The device is triggered by the phase to phase and phase to earth fault current.

¯       FIYAP100 has Permanent and transient fault indication.

¯       Reset occurs automatically elapsed after a previously selected time.

¯       FIYAP100 also turns itself off after the line is reconnected and voltage or current reaches to nominal rate.

¯       FIYAP100 are protected by a coating power supply comes from a replaceable long life lithium thionyl chloride (li-socl2) Battery with a life expectancy of  approximately10 year.

¯       The device can be mounted and removed from a live conductor by use of a " GRIPAL CLAMP" hot stick.

¯         All metal parts are made of stainless steel             

¯         Plastic parts are UV stabilized thermoplastic material (pc/abs ,pc , tpu).

¯         The functionality of the device can be tested by means of a permanent magnet.

¯         A sensor, measures permanently the magnetical field, image of the MV current , and an other sensor measure the electrical field , image of the voltage .

            A fault is either a passing over an absolute current threshold (Imax  )or a passing over a current variation during a defined time ( d i / d t ).

Technical Data:

Application

Overhead network:                                   4kv to 36kv

Frequency:                                           50HZ and 60HZ

Neutral system:                                              All

Fault detection

dIsetting:                                          factory selectable (6-12-25-60A)

dT(ms):                                                         30 ms

Absolute setting :                        factory selectable (no -200A -500A)

Temporisation

Loss of voltage validation :                       no or 5 sec

Inrush delay:                               factory selectable (no-3-30-60sec)

Reset

Automatic reset:                                               >5 kv

Delay after power recovery:                     no- 3s- 30s

After long duration:                       factory selectable (2h-4h-8h-16h)

Manually on the box:                                  by magnet

Light indication

Total light flow (Lm):                                           8 

Flashing period (s):                      factory selectable [3sec - 6sec (>2h)]

Standard flashing duration:                         >400h

Blink frequency:                           factory selectable (20-12-8-6/min)

Power supply

lithium battery:                            13Ah to18Ah lithium3.6v battery (>10years)

Environment

Operational temperature (°c):                    -40 to 85

Protection level(IEC60529)                        IP54 IK7

Mechanical

Line diameter (mm):                                     5 to 40

Net weight (kg):                                                 0.4

Wind resistance :                                        150km/h

Mounting:                                                      1 spring